Skip to content

KX SQL

Support for ANSI SQL is built into kdb Insights Core.

SQL is the most widespread and popular database query language, which with KX SQL, is now available for use with kdb Insights Core. To harness the best performance from kdb Insights Core the q language will always be the optimum way to query your data. However, KX SQL means the user does not need knowledge of the q language to access kdb Insights Core data.

SQL language support

KX SQL is a full RDBMS frontend provided with kdb Insights Core using a new s.k_ implementation.

SQL language support includes the following:

Details of compliance with ANSI SQL can be found here.

Running SQL

SQL can be invoked in several different ways:

Using s)

SQL can be entered interactively by using the s) prompt. Prefix your SQL query with 's)' to execute SQL rather than q.

This is convenient to use, as you only need to add s) to beginning of line. However, you can't save results with this method, you can only execute and print out the results.

s)select a from t

Example

s)SELECT * FROM trips WHERE date=2009.01.01

Using .s.e

.s.e is a function at the kdb Insights Core process command line which can be used to invoke SQL. The SQL query is prefixed with s.e. and wrapped in double quotes.

The benefit of .s.e over s) is that you can save results to a variable for re-use.

result:.s.e"query"
parameters notes
result Resultset of calling the query.
query SQL statement to be called, wrapped in double quotes.

Info

Dot naming notation like .s.e is commonly seen in q and is a way to define namespaces. In this instance any function prefaced with .s. will be a function related to the SQL implementation.

Examples

  • Saving the results of a query and using these results in another select statement:

    //select two fields from a tips table and outputting them into a variable x
    x:.s.e"SELECT vendor, distance FROM trips WHERE distance<20"
    
    // And then use that variable in another SQL statement
    .s.e"SELECT * FROM x"
    

Parameters

Parameters allow you to provide values to pass into a predefined query.

Execute directly

The .s.sp routine can be used to inject q type parameters into the SQL queries. Dynamic parameters are passed into the SQL query the $n notation is used to refer to the variables.

parsedquery:.s.sp[query](parameter list)
parameters notes
parsedquery Resulting parsed query which is used in the s.sx.
query SQL query where parameters are referred to with the $n notation. The query must be wrapped in square brackets.
parameter list Must be a list and passed in using q syntax. The symbol backtick should be used instead of SQL syntax for strings: `DSS rather than 'DDS'.

Info

The parameters may also be included in the qt() function.

For more information on the datatypes refer to:

Examples

  • Select column a from table t where s is either 'AAPL' or 'GOOG' and p is > 12.34:

    result:.s.sp["select a from t where s in $1 and p>$2"](`AAPL`GOOG;12.34)
    

Single parameter queries

When using only a single parameter it must be converted into a single item list as .s.sp is always expecting a list as its input.

To do this we need to add the enlist function.

// adding enlist to my parameter
.s.sp["SELECT vendor, fare FROM trips WHERE fare>$1"](enlist 50)

Warning

If the single parameter is not converted into a single item list the call with fail with a 'rank error.

Prepare and execute

The default behaviour of .s.e is to prepare the query and execute the whole statement every time it is run.

This means that for highly repeated queries, say running an analytic or running from a dashboard, the query is parsed every time it is executed. This parsing step adds significant, and unnecessary, overhead when it is really only required once.

For this scenario the functions .s.sq and .s.sx can be used to allow parsing of the query to be done only once and then just the execution is executed repeatedly.

The steps involved are as follows:

  1. Call .s.sq to prepare a parameterized query. This combines parsing and compiling of the query and deduces parameter types from the parameter list.

    parsedquery:.s.sq[query;parameter list]
    
    parameter details
    parsedquery Resulting parsed query.
    query SQL statement to be called where parameters use the $n notation. Wrap square brackets around the query.
    parameter list Always a list and passed in using q syntax where the symbol backtick should be used instead of SQL syntax 'DDS'.

    Note

    The parameters passed to the prepare statement can be tables, or even partitioned tables.

  2. Call .s.sx to execute a query prepared with .s.sq.

    resultset:.s.sx[parsedquery;parameter list]
    
    parameter details
    resultset Result-set of calling the query with the parameters provided.
    parsedquery Query being passed in to be executed with the parameters.
    parameter list Always a list and passed in using q syntax where the symbol backtick should be used instead of SQL syntax 'DDS'.

Examples

  • Prepare a query b where column a is read from a table t, column s is in a range provided by a parameterised list and column p is greater than a parameterized value. Then execute it against the trade table for different sym and p values.

    b:.s.sq["select a from t where s in $1 and p>$2"](``;0n);
    r1:.s.sx[b](`AAPL`GOOG;12.34)
    
    r2:.s.sx[b](`MSFT`VOD;56.78)
    
  • Prepare a query parsedQuery where the parameters are a table and a sym value. In this case the table schema (defined as the first parameter) is hard coded. Then execute it against the trade table for different sym values.

    parsedQuery:.s.sq["select price from $1 where sym in $2";(([]date:0#0Nd;sym:0#`;price:0#0);``)];
    r1:.s.sx[parsedQuery](trade;`AAPL`GOOG)
    
    r2:.s.sx[parsedQuery](`trade;`MSFT`VOD)
    
  • Prepare a query parsedQuery where the parameters are a table and a sym value. In this case the table schema (defined as the first parameter) is retrieved using .s.e from another SQL statement. Then execute it against the trips table for different dates.

    //SQL set up - get table schema
    tabSchema:.s.e"SELECT * FROM trips LIMIT 0"
    // parse and compile the SQL statement
    parsedQuery:.s.sq["SELECT * FROM $1 WHERE date =$2";(tabSchema;0Nd)];
    //run the queries with chosen paramater values
    r1:.s.sx[parsedQuery](trips;2009.01.01)
    r2:.s.sx[parsedQuery](`trips;2009.01.02)
    

    Info

    The backtick is optional for the table name therefore both trip and `trip can be used.

SQL parse tree

The .s.prx function shows the parse tree.

Warning

This function is in beta stages and subject to change. Its format currently not the standard q parse tree and is subject to change.

Examples

.s.prx"select * from trade where date='2021.11.23' and symbol in ('XBTUSD')"

`select ($;`trade;`trade) ,((=;`date;"2021.11.23");(in;`symbol;"XBTUSD")) () ,`*`* 0b (();();())

Performance estimate

If you wish to get a rough estimate of the performance of a particular SQL statement you can look at the different stages of parse, parse and compile, and execute.

The following steps can be time separately if required:

  • The parse stage using .s.prx, which will show the parse tree.
  • The combined parse and compile step using .s.sq.
  • The execute step using .s.sx.

Integrating with q

There are several Integrations with q that allow you to run call q functions within SQL statements and create SQL functions from q functions.

Using qt()

The qt() function allows you to call q functions and return tables.

Limitation of qt()

qt() can only in be called in the 'from' section of the statement and must be executed before compilation.

s)select a from qt(f,x,y...) where ...
parameter description
f q function being called.
x,y.. List of function parameters.

Defaults

qt() defaults to type 'a' instead of 'C'.

Example

  • Select column a from table generated by running the q function gettable with three parameters:

    s)select a from qt('{gettable[`$x;"D"$y;z]}','AAPL','2001.01.01',1)
    

Using q()

The q() function allows you to call q functions anywhere in the statement and return any q data type.

s)q(t,f,x,y..)
parameter description
t return type.
f q function being called.
x,y.. List of function parameters.

Defaults

q() defaults to type 'a' instead of 'C'.

Examples

  • Call a select statement that returns the column col from table t and passes it into the q function test which takes the two parameters of 10 and col. test returns a list of longs:

    s)select q('J','test',10,col) from t
    

Converting a q function into a SQL function

Call .s.F to convert a q function into a SQL function.

`.s.F[`functionname]:.s.fx{code}`

Example

  • Creates a fun() function from q code and then runs it in a SQL statement:

    .s.F[`fun]:.s.fx{x+1}
    s)select fun(x) from qt('([]1 2 3)')
    

Note

This is strongly typed, by running it on prototype arguments you can observe the output type.