Skip to content

Upgrading kdb Insights Enterprise

This section details the steps to upgrade kdb Insights Enterprise from a current install.

If you are upgrading kdb Insights Enterprise on Azure Marketplace, reach out to KX Support.

Prerequisites

Pre-flight checks

The upgrade process requires downtime to ensure data integrity can be guaranteed. This means that before any upgrade is scheduled, a number of pre-flight checks are necessary.

  1. Ensure the latest version of kxi-cli is installed

  2. Pre-Upgrade Versions

The currently running versions of kdb Insights Enterprise and Operator should be noted for a rollback scenario

  1. Operator

    helm ls -n kxi-operator
    
    NAME        NAMESPACE       REVISION    UPDATED                                 STATUS      CHART                       APP VERSION
    insights    kxi-operator    1           2022-04-01 15:39:44.955236379 +0000 UTC deployed    kxi-operator-1.0.0          1.0.0
    

    Overriding the Operator version

    The CLI installs the latest kdb Insights Operator minor version that matches the specified $INSIGHTS_VERSION. You can override this by passing the --operator-version command line option.

  2. Application

    helm ls -n $INSIGHTS_NAMESPACE
    
    NAME        NAMESPACE   REVISION    UPDATED                                 STATUS      CHART                   APP VERSION
    insights    kxi         1           2022-04-01 16:57:00.144126754 +0000 UTC deployed    insights-1.0.0          1.0.0
    
  3. kubectl

    You must have the kubectl tool installed on your machine and configured to access the same cluster as the kdb Insights Enterprise deployment you are upgrading.

Variables

Have the following information to hand:

variable example further details
INSIGHTS_NAMESPACE kxi Namespace of existing deployment
INSIGHTS_VERSION 1.1.1 Version to upgrade to
INSTALL_CONFIG_FILE values.yaml Install configuration
PRE_UPGRADE_INSIGHTS_VERSION 1.0.0 Current application version
PRE_UPGRADE_OPERATOR_VERSION 1.0.0 Current Operator version

Retrieve install configuration

Retrieve the INSTALL_CONFIG_FILE from the existing installation with the following command.

kxi install get-values --namespace $INSIGHTS_NAMESPACE > $INSTALL_CONFIG_FILE

Version-specific considerations

Refer to the release notes for any specific upgrade considerations for your version of kdb Insights Enterprise. This may include customizing the install configuration file retrieved previously.

Stop ingestion feeds

Stop all feeds into the application to avoid data loss with inflight data.

Upgrade with CLI

Upgrading using the CLI does not remove the persisted data backing kdb Insights Enterprise configuration or databases. These remain as persisted volumes within the Kubernetes cluster.

The steps performed by the CLI are:

  1. Backup assemblies
  2. Teardown assemblies
  3. Upgrade application, Operator and CRDs
  4. Restore assemblies

If there are no assemblies running, the CLI upgrades the base system and skips the assembly steps.

To initiate the upgrade, run the following command. This steps through the upgrade, prompting you as required.

kxi install upgrade --filepath $INSTALL_CONFIG_FILE --version $INSIGHTS_VERSION
Backing up assemblies
Persisted assembly definitions for ['dfx-assembly', 'iot-assembly'] to <ASSEMBLY STATE FILE>
...
Upgrading insights and operator
...
Reapplying assemblies
...
Upgrade to version x.x complete
...

Encryption in Transit

If you have not previously set encryption of data in transit, you will be prompted to enable it during upgrade.

If you have previously enabled encryption for data in transit, the default behaviour is to keep the existing, pre-upgrade setting. To change this setting, add the --encryption true/false command line parameter.

Post-upgrade checks

Check the system is running correctly.

  1. Expected version of kdb Insights Enterprise is running

    kubectl describe cm insights-config | grep version
    version: insights-1.1.1
    
  2. Operator installed

    helm ls -n kxi-operator
    
    NAME        NAMESPACE       REVISION    UPDATED                                 STATUS      CHART                       APP VERSION
    insights    kxi-operator    1           2022-04-11 15:39:44.955236379 +0000 UTC deployed    kxi-operator-1.1.0          1.1.0
    
  3. Application installed

    helm ls -n $INSIGHTS_NAMESPACE
    
    NAME        NAMESPACE   REVISION    UPDATED                                 STATUS      CHART                   APP VERSION
    insights    kxi         1           2022-04-11 16:57:00.144126754 +0000 UTC deployed    insights-1.1.1          1.1.1
    
  4. Operator in running state

    kubectl get pods -n kxi-operator
    
    NAME                                     READY   STATUS    RESTARTS   AGE
    insights-kxi-operator-6df4bcfddc-gnnjj   1/1     Running   0          85m
    insights-kxi-operator-6df4bcfddc-lqmrl   1/1     Running   0          85m
    insights-kxi-operator-6df4bcfddc-z45wq   1/1     Running   0          85m
    
  5. Application in running state

    kubectl get pods -n $INSIGHTS_NAMESPACE
    
    NAME                                            READY   STATUS      RESTARTS   AGE
    insights-aggregator-9959bdc87-4pg7z             2/2     Running     0          9m47s
    ...
    ...
    insights-sg-gateway-596b486d9f-pmhf4            1/1     Running     0          9m47s
    insights-sg-gateway-596b486d9f-qvzbr            1/1     Running     0          9m47s
    
  6. Assembly CRDs redeployed

    kubectl get crds | grep insights.kx.com
    
assemblies.insights.kx.com                   2022-04-11T15:23:53Z
assemblyresources.insights.kx.com            2022-04-11T15:23:54Z
  1. Ensure assemblies are up and running successfully. The CLI restores assemblies that were running before the upgrade was initiated. The example below shows two sample assemblies; you may have different assemblies, or none at all.

    kubectl get asm
    
    NAME           DESCRIPTION      READY   STATUS   AGE
    dfx-assembly   A KXI Assembly   True             28m
    iot-assembly   A KXI Assembly   True             28m
    

If all post-upgrade checks pass, any feeds into the application that were stopped before the upgrade can be restarted.

Rollback

Use the kxi install rollback command to roll back to an older version of kdb Insights Enterprise.

  1. Run kxi install history to review the release history and choose which revision you want to roll back to:

    $ kxi install history --show-operator
    REVISION    UPDATED                     STATUS          CHART               APP VERSION     DESCRIPTION
    1           Tue Feb 28 14:10:03 2023    deployed        insights-1.3.0      1.3.0           Install complete
    2           Tue Feb 28 14:16:41 2023    failed          insights-1.4.0      1.4.0           Upgrade complete
    3           Tue Feb 28 14:25:55 2023    failed          insights-1.4.1      1.4.1           Upgrade "insights" failed: post-upgrade hooks failed: timed out waiting for the condition
    
    1           Tue Feb 28 14:09:52 2023    superseded      kxi-operator-1.3.1  1.3.1           Install complete
    2           Tue Feb 28 14:15:37 2023    superseded      kxi-operator-1.4.0  1.4.0           Upgrade complete
    3           Tue Feb 28 14:24:54 2023    superseded      kxi-operator-1.4.2  1.4.2           Upgrade complete
    

    If you only want kdb Insights Enterprise revisions, remove the --show-operator from the above command.

    Revision Value

    To initiate a rollback, it's important to note that the rollback command relies on the REVISION value rather than the APP VERSION. In order to revert back to version 1.3.0 of kdb Insights Enterprise, you must identify the correct REVISION number, which in this case is simply 1.

    The version of kdb Insights Operator and kdb Insights Enterprise must match

    If the currently installed version of kdb Insights Operator does not align with the rollback version of kdb Insights Operator, it's necessary to perform the rollback on both.

  2. Teardown all running assemblies.

  3. Run kxi install rollback with the chosen revisions:

    $ kxi install rollback $INSIGHTS_REVISION --operator-revision $OPERATOR_REVISION
    Rolling Insights back to version 1.3.0 and revision 1.
    And operator back to version 1.3.1 and revision 1 [y/N]: y
    
    Backing up assemblies
    No assemblies to back up
    ...
    

    No explicit revision

    If you do not provide an explicit revision, kxi install rollback will choose the most recent one.

    Rolling back kdb Insights Enterprise only

    Omit --operator-revision if you only want to roll back kdb Insights Enterprise.

  4. Once the rollback has completed, deploy for each torn down assembly.

Failed upgrades

Assembly state files are retained upon upgrade failure. The following is an example output from a failed upgrade.

...
Persisted assembly definitions for ['dfx-assembly', 'iot-assembly'] to /tmp/tmp7ny84esa-kxi-assembly-state.yaml
...
Error: Command '['helm', 'upgrade', '--install', '-f', './values.yaml', 'insights', 'kx-insights/insights', '--version', '1.1.1', '--namespace', 'insights']' returned non-zero exit status 1.

After recovering the state of kdb Insights Enterprise, restore assemblies to their running state by executing the following command, replacing the assembly state file name with that created by the failed upgrade.

kxi assembly create --filepath /tmp/tmp7ny84esa-kxi-assembly-state.yaml

Updating your application configuration

You can apply advanced configurations to your running instance of kdb Insights Enterprise by upgrading with an updated install config file.

  1. Retrieve your install configuration from the existing application and update the resulting INSTALL_CONFIG_FILE.

  2. Upgrade your installation with the updated values file, passing the same version number as the running installation.